PPP-DP

   
Some pinsetter components removed for photos
Delta Plate extensions rest on top of felt tipped stabilizer bolts that help distribute weight of bowling balls across plate and will greatly extend life of y-switch spacers.
Heavy 10 gauge Powder-Coated steel plate construction.
No X washers or fasteners needed. Delta Plate removal is quick for easy access of adjacent parts and their fasteners. Simply lift Delta Plate from y-switch spacers.

Instructions Stabilizer Bolts.jpg (24356 bytes)
1. Remove plate assembly and insert stabilizer bolts into unused threaded holes located in top kick back plates below Delta Plate extensions.
2. Slip Delta Plate into y-switch spacers.
3. Turn stabilizer bolts down to allow Delta Plate to settle onto both y-switch spacers.
4. Turn stabilizer bolts counter-clockwise until bolt pads seat under Delta Plate against extensions. Delta Plate on Stabilizer 1.jpg (15042 bytes)
5. Remove Delta Plate and lock jam nuts against top kick back plates carefully holding bolt positions so extensions will rest on top of stabilizer pads.
6. Place Delta Plate into y-switch spacers